Wanted footpeg lowering brackets for 1100

I was able to find a set for another member via eBay a couple of weeks ago. I just checked and didn’t see any (but they may turn up from time to time)- another option is the KnightDesign pegs but they’re not cheap. A 3rd, less expensive option is GL1800 pegs (wider and ~ 0.5” lower than the existing ST pegs)- those can be bought on eBay for ~ $20 for the set (but not made by Honda- made in China)- I used them and they were fine, but I went back to my lowered pegs on both STs recently.
 
Erdoc48 said:
I was able to find a set for another member via eBay a couple of weeks ago. I just checked and didn’t see any (but they may turn up from time to time)- another option is the KnightDesign pegs but they’re not cheap. A 3rd, less expensive option is GL1800 pegs (wider and ~ 0.5” lower than the existing ST pegs)- those can be bought on eBay for ~ $20 for the set (but not made by Honda- made in China)- I used them and they were fine, but I went back to my lowered pegs on both STs recently.
Click to expand...
What are the dimensions of the pad the ball of your rests on?

I bought similar lower pegs that looked ok if I had a size 8 foot and no a 12.....
 
If you’re asking about the GW pegs, they’re just maybe 3/4” wider (the rubber pad) vs the ST pegs (I don’t have them in hand, just recalling from memory).
 
Erdoc48 said:
If you’re asking about the GW pegs, they’re just maybe 3/4” wider (the rubber pad) vs the ST pegs (I don’t have them in hand, just recalling from memory).
Click to expand...
I was referring to the st1300. I wasn't clear enough.
 
You must log in or register to reply here.
Back
Top Bottom