Article [13] ST1300 - Common Torque Values/Wrench Sizes Worksheet

[GitSum]

This worksheet has the common wrench sizes and torque values for most of the routine maintenance on the ST1300 all in one place.

This is what it looks like (low res)

Red Worksheet

Blue Worksheet

 

[cdp70]

Re: Common Torque Values & Wrench Sizes Worksheet

Very nice John!!!!

Ride safe...

 

[chiller]

Re: Common Torque Values & Wrench Sizes Worksheet

kool, thanks

 

[Chriswcalif]

Re: Common Torque Values & Wrench Sizes Worksheet

What a useful sheet! Thank you for putting this together.

Chris W.

 

[ChipSTer]

Re: Common Torque Values & Wrench Sizes Worksheet

Do you have that in the Fastest, Blue color? :crackup

 

[lenparkin]

Re: Common Torque Values & Wrench Sizes Worksheet

Thanks. This is great.

Len

 

[river]

Re: Common Torque Values & Wrench Sizes Worksheet

Sweet. Thanks so much.

It would be hard to make a black one, the nut sizes are bigger.

 

[TXRoadRash]

Re: ST1300-Common Torque Values/Wrench Sizes Worksheet

Where da heck is the black one???

 

[Byron]

Re: ST1300-Common Torque Values/Wrench Sizes Worksheet

Very nice, just downloaded to my Droid so I'll have it handy.

Thanks! :bow1:

 

[bassplayer88]

Re: ST1300-Common Torque Values/Wrench Sizes Worksheet

Looks good but you might want to check the Windshield 8mm bolt torque, I added a new shield and recommended torque was 32 In Lb. The heli gen III risers where set to 12-14 Ft lbs .. that's a lot of stress on that Lexan sheild, 9ft lb is x3 the torque of the after market recommendations..
Just and FYI..

 

[Rubberdarts]

Re: ST1300-Common Torque Values/Wrench Sizes Worksheet

Works for me and so handy, thanks.