Re: ST1300 - Ground Connector/Wire Harness (Bike Year: 2003)
took my 2003 st in for recall march 2012 and still blowing fuel pump fuses any advice?
took my 2003 st in for recall march 2012 and still blowing fuel pump fuses any advice?
Article [13] ST1300 - RECALL: Ground Connector/Wire Harness (Bike Year: 2003-2004)
- Thread starter Mellow
- Start date
-
- Tags
- 1300 recalls
Thanks for the info
Thanks for posting this Joe.
I just checked my '04#2 and guess what! It hasn't ever been done!
So I guess I'll be checking it out this weekend to see if there's any damage to the connector. This could take awhile to fix...if I need a new harness!
I just checked my '04#2 and guess what! It hasn't ever been done!
So I guess I'll be checking it out this weekend to see if there's any damage to the connector. This could take awhile to fix...if I need a new harness!
Yep, tore into it, exposed the possible connectors and they looked good (bugger to get to). No ground issues, I think my main harness has an issue, but switching to the other headlight socket did the trick for the headlight modulator. (besides the one headlight socket having an issue, my small maker lights above the headlights don't work either, went to the quarter harness and plugged them in)
Working good now!
Working good now!
wjbertrand
Ventura Highway
I know this recall doesn't apply to the 2005, but is there a similar pink ground cap assembly for the 2005 models or did they completely redesign the harness in this respect? Can anyone describe the changes, better yet photos of the change (not the repair that was used for the '03 and '04 models. Thanks
- Joined
- Feb 11, 2006
- Messages
- 8,043
- Location
- Jacksonville
- Bike
- GL1800 R1200RT NC700
- 2025 Miles
- 006570
This picture is of my 2006 hanger queen but my 2005 is the same. There is no separate pink connector just the one yellow connector just to the left of center. It seems to gather numerous grounds to one bus and then the harness leads it and other ground wires to the lug on the frame. The yellow connector on an assembled ST1300 is located in the area above and behind the right head light.
wjbertrand
Ventura Highway
Ok so early models seemed to have both the yellow and pink connectors under the rear part of the air box. So do the early models not have that yellow cap under the front faring?
-Jeff
-Jeff
wjbertrand
Ventura Highway
OK, answered my own question. Dduelin, I was referring to the area behind the engine, not the block under the faring. I did a bit more digging last night and found that the '05 does have both a yellow (power?) and pink ground cap under the purge valve solenoid, just behind and below the throttle body assembly. The attached photo is looking straight down between the back of the air cleaner and the frame cross member. The front of the bike is to the left (you can see the top of the fuel pressure regulator (slight above center left). From the outside of the assembly and the appearance of the wires, there does not seem to be any signs of distress.
Attachments
Has anyone had a problem with the yellow cap next to the pink ground cap ,my pump and coils were not getting power c,I checked the ground connector and it was fine and had the extra ground cap fitted but two pins on the yellow block were fries replaced the pins and cap from a spare loom I had but I'm getting bad connections and frankly I would like to do away with the troublesome yellow cap ,Could the wires be bared and jointed and soldered into one package or is that a no no .
- Joined
- Nov 10, 2007
- Messages
- 1,323
- Age
- 62
- Location
- Vancouver, British Columbia, Canada
- Bike
- 1&2&3-2005 ST1300ABS
My ground cap had fried connectors in it. Stripped the wires and put eyelets on and joined it all together along with a heavy gauge ground wire to the bike frame. Never had a problem since.
Lights stay on when ignition switch in Off, bike won't start | ST1300 Related
I just experienced the same symptoms on my 2003 ST1300A as Al Gulley had in this post:www.st-owners.com/forums/showthread.php?97632-Power-stays-on-when-the-key-is-removed. I was at a light and turned off the ignition (it was a long light). Upon turning the switch back on, only the neutral...
Head light stuck on high - then lights and ignition would not turn off- 06 ST1300 | ST1300 Related
Hi All, Riding home from work yesterday I noticed the high beam indicator on when i got home. I turned the bike off and massaged the left control wire harness and tested the lights. Everything was normal. Day 2 I rode to work and noticed indicator light on again. I turned off the bike and left...
Last edited:
I'm glad I found this thread, mine is a 2002 ST1300 which died 6 months ago, and finally found a burnt connection. All efforts to contact Honda UK have been in vain, and the VIN doesn't show any recalls. Does this mean I have to replace all the wiring at my own cost?
- Joined
- Nov 10, 2007
- Messages
- 1,323
- Age
- 62
- Location
- Vancouver, British Columbia, Canada
- Bike
- 1&2&3-2005 ST1300ABS
This 14 pin (Ground Cap) plastic connector that brings all the ground wires together. I had one of the connections in there that melted part of the 14 pin ground cap just like yours.
I cut and removed all of the ground wires from the ground cap and crimped round eyelets onto the wires, then used 2 brass 10/32 bolts to join all the eyelets together.
Sorry never took a picture of my round electrical connection eyelets all together on the 2 brass bolts.
This also fixes the same problem, see post 65 on this link.
Lights stay on when ignition switch in Off, bike won't start | ST1300 Related
I had the same problem on the way to NatStoc in 2012. The dealer near Omaha Nebraska found a major connection in the wiring harness had fried, melted. The place in question was below the throttle body. I saw it when they replaced it. The stealer also said there was a recall on the harness in...
CruisingDog
CRZNDOG
Did you add dielectric grease to stop corrosion ? I’ve had similar grounding issues on my SUV. I’ve started using the grease just to prevent water ingress. Copper is awful for corrosion.This 14 pin (Ground Cap) plastic connector that brings all the ground wires together. I had one of the connections in there that melted part of the 14 pin ground cap just like yours.
I cut and removed all of the ground wires from the ground cap and crimped round eyelets onto the wires, then used 2 brass 10/32 bolts to join all the eyelets together.
Sorry never took a picture of my round electrical connection eyelets all together on the 2 brass bolts.
This also fixes the same problem, see post 65 on this link.
Lights stay on when ignition switch in Off, bike won't start | ST1300 Related
I had the same problem on the way to NatStoc in 2012. The dealer near Omaha Nebraska found a major connection in the wiring harness had fried, melted. The place in question was below the throttle body. I saw it when they replaced it. The stealer also said there was a recall on the harness in...www.st-owners.com
My 2002 ST1300 flashed up an outstanding recall at last years MOT, I took it to the dealer who did the linked brake check (non-ABS) and said all good, I checked with Honda UK website and the VIN number states I still have an outstanding recall forI'm glad I found this thread, mine is a 2002 ST1300 which died 6 months ago, and finally found a burnt connection. All efforts to contact Honda UK have been in vain, and the VIN doesn't show any recalls. Does this mean I have to replace all the wiring at my own cost?
- St1300 wire harness modification
but there is now a new dealer who I intend to go to once I get my MOT sorted this yearCheck https://www.honda.co.uk/motorcycles/owners/safety/recalls-updates.html with your VIN number to see if you have the recall